Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: simpson36 on March 23, 2009, 09:09:04 AM
-
Ignores G0 move on next executed line after M99
-
Hi,
post your code as I am not sure what your problem is.
Graham
-
Attached is one of the programs that is effected.
At return from sub, next move commandis ignored.
Works fine in .021
-
It is also broken in Mach3 R3.042.024.
Here is a program that the Z instruction after the macro (line 44 is the first) return doesn't work repeatedly and so I was cutting metal when it shouldn't.
Curt
-
Try using R3.043.000
Graham
-
If I remeber correctly, .43 broke the 4th axis.
I posted that some time ago, but now I cannot find the thread.
Since there is no version change and it is still .43.00, I assume it is still bropken?
It seemed the thrust behind 43.023 and .24 was to fix threading. Does threading work in 43.00?