Hello Guest it is March 28, 2024, 06:13:57 PM

Author Topic: Xylotek controller setup, and mach system requirments  (Read 3264 times)

0 Members and 1 Guest are viewing this topic.

Xylotek controller setup, and mach system requirments
« on: July 27, 2006, 02:09:42 PM »
I have ordered the 4 axis controller..... and am going to need some "Mach 3 setup for dummies"

Also........
Will mach 3 work reliably on a 900 mhz p3 machine?

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Xylotek controller setup, and mach system requirments
« Reply #1 on: July 27, 2006, 04:18:00 PM »
For Mach3 for dummies, watch the videos at www.machsupport.com.

It should work ok on a 900, but you really need to try to find out how well it will work. Mach works differently on different PC's.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html