Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: fixittt on July 27, 2006, 02:09:42 PM
-
I have ordered the 4 axis controller..... and am going to need some "Mach 3 setup for dummies"
Also........
Will mach 3 work reliably on a 900 mhz p3 machine?
-
For Mach3 for dummies, watch the videos at www.machsupport.com.
It should work ok on a 900, but you really need to try to find out how well it will work. Mach works differently on different PC's.