Hello Guest it is March 29, 2024, 04:28:36 AM

Author Topic: How can i JOG during operation ?  (Read 3099 times)

0 Members and 1 Guest are viewing this topic.

How can i JOG during operation ?
« on: February 09, 2009, 10:51:11 AM »
Hi friends,

Can anyone please tell me if i can jog during operation. The problem is i do not have a THC and i just want to move up/down Z axis during plasma cutting.

Thanks
Re: How can i JOG during operation ?
« Reply #1 on: July 06, 2012, 09:47:00 PM »
I have the same problem, some one to help us!!!
Re: How can i JOG during operation ?
« Reply #2 on: July 07, 2012, 06:29:10 PM »
You can't jog, but you can use the THC Up/Down inputs.  Just go to Port & Pin -> Mill Option and under THC Options, elect "Allow THC control even if not in THC mode".  Now just make a remote with two buttons that activates the THC Up/Down inputs.
Re: How can i JOG during operation ?
« Reply #3 on: July 07, 2012, 06:31:50 PM »
You can't jog, but you can use the THC Up/Down inputs.  Just go to Port & Pin -> Mill Option and under THC Options, elect "Allow THC control even if not in THC mode".  Now just make a remote with two buttons that activates the THC Up/Down inputs.

Thank you :)