Hello Guest it is August 24, 2019, 12:31:58 PM

Author Topic: Work offsets saved in an external file?  (Read 1512 times)

0 Members and 1 Guest are viewing this topic.

Work offsets saved in an external file?
« on: July 07, 2012, 03:52:30 PM »
Hi

Is the work offset table editable in notepad?
Is it a file somewhere?
It seems to be only accessable by running mach.

Thanks allot for the input.

There is a file under mach3/macros/yourprofile/fixtures.dat
i dont know hot to edit a .dat file...

Anyway i dont know how to handle a tool change where the tool position
changes in not only Z by  X and Y as well.

The tool offset table seems to only handle Z value offsets.
Unless you run Mach3 lathe, but i dont feel comfortable with Mach3 lathe.

Much appreciate any input.
« Last Edit: July 07, 2012, 04:03:32 PM by john_bry »

Offline Hood

*
  •  25,849 25,849
  • Carnoustie, Scotland
    • View Profile
Re: Work offsets saved in an external file?
« Reply #1 on: July 07, 2012, 04:51:08 PM »
fixtures.dat is the work offset table and tools3.dat is the tool table but how you would alter them except from within Mach I dont know.
Hood