Hi guys,
  Here's a message you don't want to see when clicking on
your desktop icon for Mach 3 Mill!


  " This application has failed to start because ATL71-DLL was not found.
 Re-installing the application may fix this problem."
 

  My system has been running GREAT but today, not so much...
   Has anyone seen this problem or know of a solution before I try to re-install Mach?

      Thanks,
    Glenn

Have attached the ATL71 from my Mach folder, might be ok just to paste it in, if not then a reinstall should do it. You will need to change the file extension back from .txt to .dll  as I changed it so the forum would accept it.
Hood

Thanks Hood!
   I'm good as new, makin' some chips fly!

     

   I'm good as new, makin' some chips fly!

     

Glad to hear that as I am getting dizzy watching you running round that tree, now you are back at your machine I should be ok.
Hood