Hello Guest it is May 19, 2025, 07:51:55 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Program start from a tool number  (Read 4922 times)

0 Members and 1 Guest are viewing this topic.

Offline Cncman2nv

*
  • 90 90
Program start from a tool number
« on: February 12, 2010, 12:17:38 PM »
Is there a way to start running a gcode program by specifying a tool number example "tool breakage"
because when i scroll down thru the gcode window and select "run from here" button in mach it ask for a prep move that is even relevant to the part
Logged
Adam

Offline Hood

*
  • 25,835 25,835
  • Carnoustie, Scotland
Re: Program start from a tool number
« Reply #1 on: February 12, 2010, 02:47:57 PM »
Sorry dont follow what you are asking, can you try and explain a bit more please.
Hood
Logged

Offline bowber

*
  • 216 216
  • Kirkby Stephen,Cumbria, UK
Re: Program start from a tool number
« Reply #2 on: February 13, 2010, 06:51:46 AM »
I think Adam is asking if you can "run from here" without the prep move.

Steve
Logged
Pages: 1   Go Up
« previous next »