sorry been testing stuff here fro Brian and Greg, now I need to go home. That message is either your e-stop is set wrong or your limits are set wrong, both in ports and pins , inputs. Have a look on the diagnostics page and see if either the limits or e-stop LED are lit.
OK off home now getting late here but will log on when I get home.
Hood
Diagnostics: Yes, emergency are blinking ! but don't how to correct this
...Ports & Pins ---> Input Signals---> EStop Enabled, Port 1, Pin 10
But Fiscally I don't have a EStop botton in the machine
Wait a second, If I open mach3 for the first time and closed and open again and closed, the computer died, so I have to hold on/off botton to be able to shut down and turn on again