OEM codes for buttons, DRO's and LED's

[BR549]

Chaoticone, If you get a moment could you add a description for each column. I am having a hard time referenceing the old vs new stuff

I am opening with WORKS

Thanks

[andmar2005]

hello
DRO what number to use in turning the panel to display information the number of offsets used at any given time
such as M6 T01 1911
T01-No tools
11 - used thistle (just at the table for the tool T11), but loads it to the tool T01
M6 - change tools
hi

[rimawi2008]

hello , every one

iam beginner in mach3 i build plasma cnc machine and try to learn on mach3 can i ask what is dro and leds oem is?
and i need to know how can i control z- axis in mach3 i need to move it down until limit switch closed then move it up for a specific value then take  signal to start plasma
can i do that using mach3 if i cant what is the way to control plasma ??
thank you very much

[Tweakie.CNC]

Hi Rimawi2008,

Not trying to fob you off but you really need to read through some of the Mach manuals to get an idea of the way Mach works and the terminology used. The documentation can be found here http://www.machsupport.com/documentation.php
Then come back with your questions. Doing it this way will save you a lot of time. 

Tweakie.

[nelsonk11]

I haven't been able to use the mach 3 in DRO mode only.  An idea was given to me, but it didn't work out.  All I want to do is zero an axis and be able to manually move the tables with position updating.  Any other ideas?
Regards
nelsonk11