Hello Guest it is November 19, 2019, 04:01:24 PM

Author Topic: DSP controller to Mach 3 conversion.  (Read 3290 times)

0 Members and 1 Guest are viewing this topic.

DSP controller to Mach 3 conversion.
« on: December 19, 2008, 06:11:51 PM »
Howdy all,
I recently purchased a used CNC Router with a DSP Controller system. I can't say that I like the DSP at all. Not enough feedback for me. How easy would it be to change the DSP controller to a computer hookup that I could run with Mach 3?

Keeping in mind that I am pretty much electronically illiterate I need to find a system that would be fairly easy to install.

The CNC is a Chinese unit that runs with 3 steppers and is 110 volts but 3 phase.

Martyn.