Hello Guest it is September 21, 2023, 05:14:06 AM

Author Topic: driver test  (Read 2569 times)

0 Members and 1 Guest are viewing this topic.

driver test
« on: December 20, 2008, 11:12:49 AM »
It is clear that I know just enough to be very dangerous.  >:D

I was hoping someone can offer some guidance on two questions I have after running the driver test.

1) When I searched around prior to posting it looks like I have an older test from the screen shots I have seen.  I used the file in the Mach3 folder.  Not sure if there is some type of upgrade or different file I should use?  I have version 2.63.

2) From this image I see a very flat line which I believe is good.   But I am wondering if the longest and shortest times are appropriate?

As always thanks for any help.


Offline Hood

  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: driver test
« Reply #1 on: December 20, 2008, 02:00:27 PM »
You will need the latest lockdown of Mach to get the new driver test.
Your driver test looks fairly good :)