Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: dfurlano on December 20, 2008, 11:12:49 AM

Title: driver test
Post by: dfurlano on December 20, 2008, 11:12:49 AM

It is clear that I know just enough to be very dangerous.  >:D

I was hoping someone can offer some guidance on two questions I have after running the driver test.

1) When I searched around prior to posting it looks like I have an older test from the screen shots I have seen.  I used the file in the Mach3 folder.  Not sure if there is some type of upgrade or different file I should use?  I have version 2.63.

2) From this image I see a very flat line which I believe is good.   But I am wondering if the longest and shortest times are appropriate?

(http://www.dfurlano.com/test.jpg)

As always thanks for any help.

Dan

Title: Re: driver test
Post by: Hood on December 20, 2008, 02:00:27 PM

You will need the latest lockdown of Mach to get the new driver test.
Your driver test looks fairly good :)
Hood