Hello Guest it is June 23, 2024, 06:05:16 PM

Author Topic: Z THC down working up not working?  (Read 3454 times)

0 Members and 1 Guest are viewing this topic.

Z THC down working up not working?
« on: December 03, 2008, 11:32:23 AM »
This is in Mill Screen:
I have the UP/Down inputs emulated and the LEDs in Diag. tab light up and the THC move is enabled in Mill tab in ports/pins.  And only the down works when running code but not up? the LEDs light up for up and down.

Do I need to mess with the THC min max DRO's?

The up/down works ok in Plasma screen.  But I need it in Mill screen.

Ver. 3.042.020



Offline Hood

  •  25,835 25,835
  • Carnoustie, Scotland
Re: Z THC down working up not working?
« Reply #1 on: December 03, 2008, 05:40:04 PM »
Never used it so dont know but  you can add the DROs that are on the plasma screen to the mill screen and it might help.