Hi All,
MACH V 3.042.18 using PP / NEC LAPTOP with PP.
Just DRY ran a number of thread cut tests and don't seem to have any problems.
The backlash compensation works during threading, no index problems.
Feedrate changes on the rapids to what it should be, feedrate and rpm DRO change accordingly to slow down of and speed up of the spindle ( speed up only after a spindle slowdown ) ( response seems to be rather quick ), G94 & G95 change correctly.
I like the new diagnostics.
So looks good on my end. BTW my spindle rpm is set manualy. I quess the only bummer is if you don't have a program
which generates the G32 threading code.
Will try some actual cutting tomorrow and see what happens.
RICH