I just download the demo of Mach 2 for my maxnc 10 ol got all the driver (from the forums ) the motor sound as if they are trying to step but there is no movement i am at a lost i want to be able to manual step the machine before i buy the software.
Thanks

Rodney

Did you check Max NC mode under the ports and pins?

yes the maxnc mode is check

Do you have any info on the pinout of your drives? I am thinking that you are not running the wave drives.... I am sorry I have never seen the MaxNC drives or worked with them... But I will do my best!

no i do not have the pinout of the drives i will call maxnc today and try and get the pin outs from them

Hi, rodney
I am new to the forum and I have Maxnc 15 CL that I try to get going with mach but I had the same problem as you.
did you get your machine to work?
if so can you shared the some information.

Thanks

There are docs for the pinout on the FTP server I will see if I can get an XML from a guy that I helpped out that other day and post it on the FTP server