Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: rodneya on July 06, 2006, 02:01:10 PM
-
I just download the demo of Mach 2 for my maxnc 10 ol got all the driver (from the forums ) the motor sound as if they are trying to step but there is no movement i am at a lost i want to be able to manual step the machine before i buy the software.
Thanks
Rodney
-
Did you check Max NC mode under the ports and pins?
-
yes the maxnc mode is check
-
Do you have any info on the pinout of your drives? I am thinking that you are not running the wave drives.... I am sorry I have never seen the MaxNC drives or worked with them... But I will do my best!
-
no i do not have the pinout of the drives i will call maxnc today and try and get the pin outs from them
-
Hi, rodney
I am new to the forum and I have Maxnc 15 CL that I try to get going with mach but I had the same problem as you.
did you get your machine to work?
if so can you shared the some information.
Thanks
-
There are docs for the pinout on the FTP server :) I will see if I can get an XML from a guy that I helpped out that other day and post it on the FTP server