Hi fellas,
Just got off the phone with Chris over at Probotix. He got me all fixed up as I had the wrong setup in the outputs signals tab. It should have been enable 4 port 2 pin 1. Not enable 2 like I had because I misread something in the manual. Those people over there are just fantastic with their support-
Bill, the JP6 does need to be disconnected if powering with the USB port as is written in the manual.
Thanks again for all your help fellas, even though I see how much you guys are there to help out everyday, when you're the one being helped, it means so much more-
Now I just have to get my base for the motor and rotary table fabricated and I'm ready to try some 4th axis schtuff!!
Thanks,
Dave