Hello Guest it is March 28, 2024, 08:01:48 AM

Author Topic: parmeter and create file in turn  (Read 2548 times)

0 Members and 1 Guest are viewing this topic.

parmeter and create file in turn
« on: September 21, 2008, 07:46:42 PM »
how do i get the whole page in the project window to come up after i click the turn button in the bottom, only part of the info comes up. i cant get the create profile section to come up,  how do i delete the other stuff like turn pockets foam etc. to access everything else?

thanks alex

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: parmeter and create file in turn
« Reply #1 on: September 21, 2008, 10:08:37 PM »
alex850,
You click the PROJECT & INFO buttons on the top bar to turn the windows on and off. To get the create profile section to be in the window, just grab the bottom of the window and pull down some. the windows work very similar to
manipulating a window in Windows XP / 2000 / etc . You can make them tall or thin or as you already know fill the whole page. One of the videos talks about the windows in Lazycam.
RICH