Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: alex850 on September 21, 2008, 07:46:42 PM

Title: parmeter and create file in turn
Post by: alex850 on September 21, 2008, 07:46:42 PM

how do i get the whole page in the project window to come up after i click the turn button in the bottom, only part of the info comes up. i cant get the create profile section to come up,  how do i delete the other stuff like turn pockets foam etc. to access everything else?

thanks alex

Title: Re: parmeter and create file in turn
Post by: RICH on September 21, 2008, 10:08:37 PM

alex850,
You click the PROJECT & INFO buttons on the top bar to turn the windows on and off. To get the create profile section to be in the window, just grab the bottom of the window and pull down some. the windows work very similar to
manipulating a window in Windows XP / 2000 / etc . You can make them tall or thin or as you already know fill the whole page. One of the videos talks about the windows in Lazycam.
RICH