Hello,

After Generating some code in a cam program I then save the file as a Tap ->  load it into Mach 3 Turn.  -> the file works great untill the last 10 or 20 lines.

I am using the demo version and the code only has 160 lines.

Any help would be great.

Thanks,

Andy

Post the code, so see what is happening.

Filipe

Unlicenced versions are limited, Turn I think is limited to 150 or 200 lines, mill has a bit more, 500 I think.
Hood

Thanks,  I am saving for a licence....looks like I need it.

Andy