Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Tef9 on September 17, 2008, 11:38:39 AM
-
Hello,
After Generating some code in a cam program I then save the file as a Tap -> load it into Mach 3 Turn. -> the file works great untill the last 10 or 20 lines.
I am using the demo version and the code only has 160 lines.
Any help would be great.
Thanks,
Andy
-
Post the code, so see what is happening.
Filipe
-
Unlicenced versions are limited, Turn I think is limited to 150 or 200 lines, mill has a bit more, 500 I think.
Hood
-
Thanks, I am saving for a licence....looks like I need it.
Andy