Hello Guest it is April 21, 2019, 10:53:40 AM

Author Topic: Work offset touch Button?????  (Read 6445 times)

0 Members and 1 Guest are viewing this topic.

Work offset touch Button?????
« on: September 07, 2008, 11:09:06 PM »
I am trying to use Work Offsets as described in section 7.2.1 of the Mach 3 user manual.

Written as follows:  "Click the Touch button next to each of the axis in the current Work offset part of the screen".

No matter what I do nothing works as stated.

What the "Touch button"?

Any help please?


Bruce
Re: Work offset touch Button?????
« Reply #1 on: September 08, 2008, 12:20:22 AM »


Machbruce'

The "touch button" would be the x-y-z  zero buttons on the right side of the off sets page @ REF ALL.
 The dros on the left side of the screen shows where you are from machine coordinates for each work offset,
wheather its g54-55 or 56-57-58.
Hope this answers your question.

Ed V
Ed VanEss
Re: Work offset touch Button?????
« Reply #2 on: September 08, 2008, 02:14:07 AM »
That clears it up,

Thanks,

Bruce

Offline Hood

*
  •  25,779 25,779
  • Carnoustie, Scotland
    • View Profile
Re: Work offset touch Button?????
« Reply #3 on: September 08, 2008, 02:54:23 AM »
Wow Ed, has Britt taken off her makeup?
;D
Hood
Re: Work offset touch Button?????
« Reply #4 on: September 08, 2008, 12:51:54 PM »
No, she just got in a fight with the dog.  ;D
Ed VanEss

Offline Chaoticone

*
  • *
  •  5,472 5,472
  • Precision Chaos
    • View Profile
Re: Work offset touch Button?????
« Reply #5 on: September 08, 2008, 02:01:57 PM »
She is Hot!!!!!!!!!!!   :)

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!

Offline Hood

*
  •  25,779 25,779
  • Carnoustie, Scotland
    • View Profile
Re: Work offset touch Button?????
« Reply #6 on: September 08, 2008, 02:42:37 PM »
She is Hot!!!!!!!!!!!   :)

Brett
Spoken like a true Redneck, man that is your sister!!!!!!!!!! ;D

Hood
Re: Work offset touch Button?????
« Reply #7 on: September 08, 2008, 02:48:03 PM »
I thought maybe it was Ed and Britts offspring...and we were not informed of the "Blessed Event".
(for obvious reasons)
RC

Offline Hood

*
  •  25,779 25,779
  • Carnoustie, Scotland
    • View Profile
Re: Work offset touch Button?????
« Reply #8 on: September 08, 2008, 02:52:13 PM »
;D
Re: Work offset touch Button?????
« Reply #9 on: September 08, 2008, 03:28:20 PM »
Brett,
   Just like lookin in a mirror  ?   ;D
Ed
Ed VanEss