Hello Guest it is January 18, 2020, 03:19:55 PM

Author Topic: SHERLINE ROTARY TABLE MOTOR MOUNTING  (Read 4050 times)

0 Members and 1 Guest are viewing this topic.

Offline RICH

*
  • *
  •  7,401 7,401
    • View Profile
SHERLINE ROTARY TABLE MOTOR MOUNTING
« on: July 06, 2008, 04:39:28 PM »
Nothing fancy. Just showing how a stepper motor was mounted to a Sherline rotary table.
The square adapter under the table allows for easy insertion into a vise and provides for centering of the table to the block.
The adapter can be remove and holes in the adapter ( can't see them ) allow for mounting to a sine and right angle plate.
The stepper motor mount was made from a scrapped assembly "save good junk". Will change out stepper with one having dual shafts so it can be used manually.
RICH



Offline Glenn

*
  •  129 129
    • View Profile
Re: SHERLINE ROTARY TABLE MOTOR MOUNTING
« Reply #1 on: October 21, 2008, 06:36:08 PM »
Rich,
   Great work! Does this rotary go on a sherline mill, or retro fit
to your router table for 4th axis usage?

  All junk is GOOD ;D  Glenn
Don't assume anything.....it'll make a Manager out of U and Me!

Offline Chaoticone

*
  • *
  •  5,634 5,634
  • Precision Chaos
    • View Profile
Re: SHERLINE ROTARY TABLE MOTOR MOUNTING
« Reply #2 on: October 21, 2008, 07:00:28 PM »
Good Job Rich. I have to build a rotary table for the Hurco soon.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!