Hello, i need my mill to bring Z axis down after X and Y are in postion.
Below is example of a Bolt Circle Program by Mach NFS...
(Code by Newfangled Wizard, 8/13/2008)
(Program Posted for Aluminum )
G0 G49 G40.1 G17
G80 G50 G90 G98
G20 (Inch)
(***** Circular Hole Pattern *****)
M6 T3
M03 S4000
M9
G00 G43 H3 Z0.2<(Need this removed)
G81(Need G99 added here for drill cycles) X2 Y0 Z-0.3 R0.1 F7.9
X1.6235 Y0.7818
X0.7775 Y0.9749
X0.099 Y0.4339
X0.099 Y-0.4339
X0.7775 Y-0.9749
X1.6235 Y-0.7818
G80
M5 M9
M30
As for milling operation i need Z to come down to ref position AFTER X & Y are in position.
Is there a way to have Mach do this automaticaly?Like with VB or Brain,I dont know.