Hello Guest it is March 29, 2024, 10:28:27 AM

Author Topic: Softlimits not working with smoothstepper  (Read 3469 times)

0 Members and 1 Guest are viewing this topic.

Softlimits not working with smoothstepper
« on: August 13, 2008, 05:25:00 PM »
I have come accross another problem, my softlimits no longer work after installing my smooth stepper. They were working fine with the parallel port configuration.  I have checked my settings everything seems OK but softlimits won't work at all. Does anyone have any ideas.

Thanks,
Tom

Offline budman68

*
  • *
  •  2,352 2,352
    • View Profile
Re: Softlimits not working with smoothstepper
« Reply #1 on: August 13, 2008, 05:30:19 PM »
Hi Tom,

I believe this is already known. Check out the Smooth Stepper area here:

http://www.machsupport.com/forum/index.php/topic,7920.0.html

You may also want to try the actual smooth stepper forum-

 http://www.Warp9TD.com

Dave

----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline budman68

*
  • *
  •  2,352 2,352
    • View Profile
Re: Softlimits not working with smoothstepper
« Reply #2 on: August 13, 2008, 05:37:30 PM »
I actually found a link that Gregs says where they are on the soft limits function, Tom:

http://www.warp9td.com/index.php?option=com_fireboard&Itemid=33&func=view&id=1064&catid=7
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)
Re: Softlimits not working with smoothstepper
« Reply #3 on: August 14, 2008, 10:53:53 PM »
Hi,

I did some BETA testing for Greg a while ago on a plugin that has the soft limits working.  In this version of the plugin the soft limits performed virtually the same as they do when using the PP.  There were a couple of quirky things though and I reported all of my findings back to Greg.  I think he is/should be VERY close to releasing a new plugin that has soft limits implemented.

HTH,
Sid