Hello Guest it is March 29, 2024, 07:42:15 AM

Author Topic: Smooth Stepper Homing error  (Read 3373 times)

0 Members and 1 Guest are viewing this topic.

Smooth Stepper Homing error
« on: August 13, 2008, 12:17:57 PM »
I just installed a smooth stepper from warp9. Everything is working well except when I try to home the machine, the Z axis will hit the home/limit switch the slowly back off, but when the y axis hits the home/limit switch it seemes as it starts the mach goes into e-stop limit switch error. I have tried different setting in the smooth stepper config and in mach Debounce, nothing seemes to help.  I have read the Manuel but it is incomplete and I just am lost right now.

Thanks,
Tom

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Smooth Stepper Homing error
« Reply #1 on: August 13, 2008, 12:30:04 PM »
Check out the Warp9 site. Thought i saw something posted there on limit switches.
RICH

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Smooth Stepper Homing error
« Reply #2 on: August 13, 2008, 01:18:29 PM »
Get the latest plugin (13c I think) it has the digital filtering options and it seems to work very well.
Hood
Re: Smooth Stepper Homing error
« Reply #3 on: August 13, 2008, 05:20:45 PM »
I was able to fix the problem by rewiring my switch's to normally closed, and they are now working properly. Thanks for the help

Tom