Ha, thought I knew what I was doing almost, finally got the X & Z axis motors mounted on my Taig,
Wrote a bit of code:
g0 z0
g1 z .25
g0 z0
g1 x .01
g1 z .25
g0 x 0
g0 z0
g1 x .2
g1 z .25
etc...
Sure there is an easier way with loops but can't find the examples I have seen here.
All I want to do at the moment is say take a piece of round stock in the lathe, and turn say .5 long with repeat passes off .010" for the purpose of taking a video, I also seem to have forgotten how to put a dwell time in as I would like to have say 15-30 seconds to man the camera after I hit cycle start. Think that is g4 but can't remember the syntax like g4 P30?
Thanks
Kristin