Hello Guest it is December 02, 2021, 11:59:15 AM

Author Topic: Charge Pump Output Check/Verify ?  (Read 3394 times)

0 Members and 1 Guest are viewing this topic.

Charge Pump Output Check/Verify ?
« on: July 15, 2008, 10:23:38 AM »
Hey Folks,
Using a DMM, can the Mach Charge Pump freq. be checked... or just verified on its assigned port/output pin ?
Not the actual pulse count, just positive evidence of its presence.
Thanks,
RC

Offline Hood

*
  •  25,838 25,838
  • Carnoustie, Scotland
    • View Profile
Re: Charge Pump Output Check/Verify ?
« Reply #1 on: July 15, 2008, 10:49:17 AM »
I would imagine if you put the DMM on mv range you should see something, cant test as a boats skipper just borrowed the DDM but when he brings it back I will test it if you havent had an answer from any one else.

Hood

Offline Hood

*
  •  25,838 25,838
  • Carnoustie, Scotland
    • View Profile
Re: Charge Pump Output Check/Verify ?
« Reply #2 on: July 15, 2008, 11:03:44 AM »
OK just got the meter back, getting 2+ volts at the chargepump, thought it would be less but forgot its not a high frequency . So yes you should get a voltage of around 2 or 3 volts.
Hood
Re: Charge Pump Output Check/Verify ?
« Reply #3 on: July 15, 2008, 11:39:49 AM »
I checked as well....1.97v
Thanks Hood,
RC