well, it used to work fine, but here is a work around for you.
1). Load your Lathe profile (which ever one you use, i.e. MachTurn).
2). If you have the lathe flash screen in there, and it show mill wizards instead of lathe wizards..
3). goto load screens, then load the STANDARD OEM Mach Turn screen set.
4). Then close, and reopen your profile, it will come back up with the STANDARD OEM lathe screen.
5). Check the Wizards, and make sure you see the Lathe wizards.
6). if you do, then your in a Lathe type profile for sure now, go back to Load Screens.
7). Now load your Flash Lathe screen, it should work correctly now this point forward.
scott