Author Topic: Reverse Run doesn't work...  (Read 11778 times)

0 Members and 1 Guest are viewing this topic.

Offline borbori

  • Active Member
  • Posts: 13
    • View Profile
Reverse Run doesn't work...
« on: April 11, 2008, 02:53:53 PM »
Hi,

I'm using mach3 3.039 demo version on my Flame-cut cnc machine, so if i lost the cut i need to run the program in reverse and reverse run doesn't work at all ...

any suggestions ?

Thanx
Arush

Offline ludo

  • Active Member
  • Posts: 9
    • View Profile
Re: Reverse Run doesn't work...
« Reply #1 on: August 29, 2008, 03:38:27 AM »

  I have the same problem,reverse run led do not work.

Offline Hood

  • Mach4 Alpha
  • Posts: 25,775
  • Carnoustie, Scotland
    • View Profile
Re: Reverse Run doesn't work...
« Reply #2 on: August 29, 2008, 04:34:09 AM »
Reverse run amongst a few other features are not in the Demo version.
Hood

Offline GITCO

  • Holding
  • Posts: 2
    • View Profile
Re: Reverse Run doesn't work...
« Reply #3 on: July 03, 2016, 01:08:29 AM »
Hi
i have a mach3 Usb(MK3-IV) and software Version R3.043.066(DEMO) on my Flame-cut cnc machine.
when select "normal-printer-port-operation" in first run plasma mode "REVERSE RUN" buttom is active but with select"NC-USB-pod-xhc-mach3-USB-motion card" doesn't work at all ...
m.rezaei@gitco.ir
thanks a lot

Offline GITCO

  • Holding
  • Posts: 2
    • View Profile
Re: Reverse Run doesn't work...
« Reply #4 on: July 03, 2016, 02:05:28 AM »
Hi
i have a mach3 Usb V4.3 (MK3-IV) and software Version R3.043.066(DEMO) on my Flame-cut cnc machine.
when select "normal-printer-port-operation" in first run plasma mode "REVERSE RUN" buttom is active but with select"NC-USB-pod-xhc-mach3-USB-motion card" doesn't work at all ...
Is it possible that the software and the corresponding drive?
When installing drivers in the computer manager drive is unknown, but cutting is done. And only run reverse does not work.
If possible and appropriate driver software to send me.
please help me
m.rezaei@gitco.ir
thanks a lot

Offline dude1

  • Active Member
  • Posts: 1,253
    • View Profile
Re: Reverse Run doesn't work...
« Reply #5 on: July 03, 2016, 06:27:15 AM »
buy a licences