Hello Guest it is September 15, 2019, 01:38:19 PM

Author Topic: HillBilly's BOB  (Read 16921 times)

0 Members and 1 Guest are viewing this topic.

HillBilly's BOB
« on: May 12, 2006, 08:46:07 AM »
I made some extra boards if anybody is interested. 



$79usd board with 7407 buffers and 4n25 optos.(24v input standard)
Solid state relay outputs cost more but can turn on one LARGE contactor.

(Price was changed from $69 to $79 in late 2008 when more boards were made and the production price had increased.)

Thanks,
Darek
« Last Edit: April 01, 2009, 10:25:47 AM by HillBilly »
Re: HillBilly's BOB
« Reply #1 on: May 31, 2006, 07:14:20 PM »
Here is a spindle speed module before potting and one in action.




Thanks Benny for teaching me how to hot link!

Darek

ynneb

*
Re: HillBilly's BOB
« Reply #2 on: May 31, 2006, 10:45:40 PM »
Quote
Thanks Benny for teaching me how to hot link!
I wasnt aware that I did, but Ill take credit anyway :)

Your boards look nice and clean. I hope you do well selling them.
Re: HillBilly's BOB
« Reply #3 on: June 02, 2006, 08:07:02 AM »
Benny,

You did, see where you edited my first post. Thanks for the compliment on the boards. So far the couple I have sold are for retrofitting the Bridgeport BOSS stepper machines. It gives these great old machines a new brain and is what inspired me to make the boards.

Darek 
Re: HillBilly's BOB
« Reply #4 on: March 08, 2009, 09:23:02 PM »
Dear HillBilly.
Pls. kindly quote me about your  board, with IC's.
What's your e-mail address?
Waiting for your soon.
Nam
« Last Edit: March 08, 2009, 09:25:44 PM by namnp2007 »
Re: HillBilly's BOB
« Reply #5 on: May 15, 2011, 05:08:43 AM »
Will these boards work with Yaskawa SGDH Sigma-II servo drives and MACH3?  If they will do you have any left and how much? letsonr@charter.net
Re: HillBilly's BOB
« Reply #6 on: May 15, 2011, 06:57:52 AM »
Yes, I'm sure that these board can work with Yaskawa motor and Mach3( I used it about 3 years ago and they work fine untill now).
Re: HillBilly's BOB
« Reply #7 on: May 17, 2011, 10:51:42 PM »
Do you ave any of the boards for sale and what is you price with ics?
Re: HillBilly's BOB
« Reply #8 on: February 21, 2012, 01:06:46 PM »
Where do I purchase a hillbilly bob? Thanks
Re: HillBilly's BOB
« Reply #9 on: February 21, 2012, 06:59:22 PM »
@Mred & letran: You can purchase Hillbilli's BOB from Hillbilli, ofcouse, but I have some to sale . Plaese PM me about the price, or mail me at : namnp2007(at)gmail.com