Machsupport Forum

Third party software and hardware support forums. => Promote and discuss your product => Topic started by: HillBilly on May 12, 2006, 08:46:07 AM

Title: HillBilly's BOB
Post by: HillBilly on May 12, 2006, 08:46:07 AM

I made some extra boards if anybody is interested. 
(http://home.icx.net/~ashburn/sitebuildercontent/sitebuilderpictures/bob.jpg)
(http://home.icx.net/~ashburn/sitebuildercontent/sitebuilderpictures/schem.jpg)

$79usd board with 7407 buffers and 4n25 optos.(24v input standard)
Solid state relay outputs cost more but can turn on one LARGE contactor.

(Price was changed from $69 to $79 in late 2008 when more boards were made and the production price had increased.)

Thanks,
Darek

Title: Re: HillBilly's BOB
Post by: HillBilly on May 31, 2006, 07:14:20 PM

Here is a spindle speed module before potting and one in action.

(http://home.icx.net/~ashburn/sitebuildercontent/sitebuilderpictures/ssm03.jpg)
(http://home.icx.net/~ashburn/sitebuildercontent/sitebuilderpictures/ssm02.jpg)

Thanks Benny for teaching me how to hot link!

Darek

Title: Re: HillBilly's BOB
Post by: ynneb on May 31, 2006, 10:45:40 PM

Quote

Thanks Benny for teaching me how to hot link!

I wasnt aware that I did, but Ill take credit anyway :)

Your boards look nice and clean. I hope you do well selling them.

Title: Re: HillBilly's BOB
Post by: HillBilly on June 02, 2006, 08:07:02 AM

Benny,

You did, see where you edited my first post. Thanks for the compliment on the boards. So far the couple I have sold are for retrofitting the Bridgeport BOSS stepper machines. It gives these great old machines a new brain and is what inspired me to make the boards.

Darek 

Title: Re: HillBilly's BOB
Post by: namnp2007 on March 08, 2009, 09:23:02 PM

Dear HillBilly.
Pls. kindly quote me about your  board, with IC's.
What's your e-mail address?
Waiting for your soon.
Nam

Title: Re: HillBilly's BOB
Post by: letray on May 15, 2011, 05:08:43 AM

Will these boards work with Yaskawa SGDH Sigma-II servo drives and MACH3?  If they will do you have any left and how much? letsonr@charter.net

Title: Re: HillBilly's BOB
Post by: namnp2007 on May 15, 2011, 06:57:52 AM

Yes, I'm sure that these board can work with Yaskawa motor and Mach3( I used it about 3 years ago and they work fine untill now).

Title: Re: HillBilly's BOB
Post by: letray on May 17, 2011, 10:51:42 PM

Do you ave any of the boards for sale and what is you price with ics?

Title: Re: HillBilly's BOB
Post by: Mred on February 21, 2012, 01:06:46 PM

Where do I purchase a hillbilly bob? Thanks

Title: Re: HillBilly's BOB
Post by: namnp2007 on February 21, 2012, 06:59:22 PM

@Mred & letran: You can purchase Hillbilli's BOB from Hillbilli, ofcouse, but I have some to sale . Plaese PM me about the price, or mail me at : namnp2007(at)gmail.com