Hello Guest it is April 25, 2019, 04:29:10 AM

Author Topic: Setting toolchanges  (Read 3011 times)

0 Members and 1 Guest are viewing this topic.

Offline Tyler

*
  •  10 10
    • View Profile
Setting toolchanges
« on: April 02, 2008, 09:33:23 PM »
Does LazyCam output toolchange code anymore? It seems to have gone away from 2.41(or something close) to 3.0.02(or something close).

 It's a bit of a pain having to tell Mach3 to hold the feed manually as opposed to having it in code, and the mill head getting above the piece so I can initiate the change without worrying about messing up my job.

Hopefully I'm just oblivious and missing something really simple?

Thanks, Tyler.

Offline Chip

*
  • *
  •  2,057 2,057
  • Gainesville Florida USA
    • View Profile
Re: Setting toolchanges
« Reply #1 on: April 02, 2008, 10:13:30 PM »
Hy, Tyler

Is a Picture worth a 1,000 Word's.

Let us Now, Chip
« Last Edit: April 02, 2008, 10:17:22 PM by Chip »

Offline budman68

*
  • *
  •  2,360 2,360
    • View Profile
Re: Setting toolchanges
« Reply #2 on: April 03, 2008, 06:15:16 PM »
Quote
Let us Now, Chip

indeed we shall !  :D
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)

Offline Tyler

*
  •  10 10
    • View Profile
Re: Setting toolchanges
« Reply #3 on: April 04, 2008, 01:05:42 PM »
I see, so that's what the tool# option is. I wasn't quite sure, thanks a bunch chip.

-Tyler