Machsupport Forum
G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: Tyler on April 02, 2008, 09:33:23 PM
-
Does LazyCam output toolchange code anymore? It seems to have gone away from 2.41(or something close) to 3.0.02(or something close).
It's a bit of a pain having to tell Mach3 to hold the feed manually as opposed to having it in code, and the mill head getting above the piece so I can initiate the change without worrying about messing up my job.
Hopefully I'm just oblivious and missing something really simple?
Thanks, Tyler.
-
Hy, Tyler
Is a Picture worth a 1,000 Word's.
Let us Now, Chip
-
Let us Now, Chip
indeed we shall ! :D
-
I see, so that's what the tool# option is. I wasn't quite sure, thanks a bunch chip.
-Tyler