Thanks for the post. i been practicing coding different shapes .. like pyramid type things, wrapping my mind around how to code stuff, below is a code i made for practice but i know parts are missing such as spindle speed, which direction of rotation, manual stop and a few others
What program is used for the cam thing? id be interested in checking it out
and welding is going pretty good, we finished up our Tig welding course, i got my lap and 1/4" thick mild steel root passes done in all positions, since i got finished ahead of everyone else, i was show how to use the pipe cutter to bevel off edges of schedule 80 pipe
was practicing Tig welding the roots of pipe in all positions (tacked the pipe in a fixed position) and welded all the way around, very nice penetration on the insides with no skipped edges, got my hot passes in but had trouble filling up with the 7018, need more practice at that, i know what the problem was tho, doing blueprinting now for a month then done, out working
but yeh, any information about the cam program would be greatly appreciated, and practice coded is below if you wanted to check it out for some constructive criticism
Thanks in advance for any help