Hello Guest it is November 12, 2019, 03:18:49 AM

Author Topic: Mach2 part resizing  (Read 2270 times)

0 Members and 1 Guest are viewing this topic.

Offline wss

*
  •  3 3
    • View Profile
Mach2 part resizing
« on: March 10, 2008, 03:32:47 PM »
I have been using Mach2 for a few years now with a very personal item - I have had very good results.

I have a need to resize a current part but do not want to go through the CAM process again to resize it.

Any suggestions?

Thanks

Offline wss

*
  •  3 3
    • View Profile
Re: Mach2 part resizing
« Reply #1 on: March 10, 2008, 03:36:43 PM »
Excuse me - CAD process.

Offline Hood

*
  •  25,856 25,856
  • Carnoustie, Scotland
    • View Profile
Re: Mach2 part resizing
« Reply #2 on: March 10, 2008, 04:17:28 PM »
You can scale each axis in Mach, so if you want to make the part double the sizeput 2 in each scale DRO, if you want to reduce it by half then put 0.5 in them.
Hood

Offline wss

*
  •  3 3
    • View Profile
Re: Mach2 part resizing
« Reply #3 on: March 10, 2008, 04:19:08 PM »
Great -- thanks.