Hello Guest it is November 30, 2020, 08:16:26 AM

Author Topic: Can I have two different configs in Mach 3 to run separate machines.  (Read 2490 times)

0 Members and 1 Guest are viewing this topic.

I am running Mach 3 on my CNC router and I would like to make a CNC foam cutter next. Is there some way I could run two different configs in Mach 3? I just want 1 computer for both as I am running out of space.
Re: Can I have two different configs in Mach 3 to run separate machines.
« Reply #1 on: February 25, 2008, 10:47:18 AM »
Sure,
Check this out.....http://www.machsupport.com/forum/index.php/topic,948.0.html
Also, do a search for "Two Profiles".
Gads of info.
Good luck,
RC
Re: Can I have two different configs in Mach 3 to run separate machines.
« Reply #2 on: February 25, 2008, 02:20:59 PM »
Great,
Thanks for the info.