Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: tz1238 on February 25, 2008, 10:00:06 AM

Title: Can I have two different configs in Mach 3 to run separate machines.
Post by: tz1238 on February 25, 2008, 10:00:06 AM

I am running Mach 3 on my CNC router and I would like to make a CNC foam cutter next. Is there some way I could run two different configs in Mach 3? I just want 1 computer for both as I am running out of space.

Title: Re: Can I have two different configs in Mach 3 to run separate machines.
Post by: Overloaded on February 25, 2008, 10:47:18 AM

Sure,
Check this out.....http://www.machsupport.com/forum/index.php/topic,948.0.html
Also, do a search for "Two Profiles".
Gads of info.
Good luck,
RC

Title: Re: Can I have two different configs in Mach 3 to run separate machines.
Post by: tz1238 on February 25, 2008, 02:20:59 PM

Great,
Thanks for the info.