Hello Guest it is December 06, 2019, 03:44:01 AM

Author Topic: Jogging Z Axis  (Read 1894 times)

0 Members and 1 Guest are viewing this topic.

Jogging Z Axis
« on: February 22, 2008, 11:18:41 PM »
I can use the arrow keys to jog the x and y axis on my machine, but how do you jog the z axis to test your board and motots.

Offline Chaoticone

*
  • *
  •  5,633 5,633
  • Precision Chaos
    • View Profile
Re: Jogging Z Axis
« Reply #1 on: February 22, 2008, 11:34:23 PM »
All axis use the up and down arrow keys in motortuning. Page up and page down are used to jog the z on default screens.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!