Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: dshowalt on February 22, 2008, 11:18:41 PM

Title: Jogging Z Axis
Post by: dshowalt on February 22, 2008, 11:18:41 PM
I can use the arrow keys to jog the x and y axis on my machine, but how do you jog the z axis to test your board and motots.
Title: Re: Jogging Z Axis
Post by: Chaoticone on February 22, 2008, 11:34:23 PM
All axis use the up and down arrow keys in motortuning. Page up and page down are used to jog the z on default screens.

Brett