Hello Guest it is August 21, 2019, 02:52:25 PM

Author Topic: Video Tutorials for Mach  (Read 30277 times)

0 Members and 1 Guest are viewing this topic.

ynneb

*
Video Tutorials for Mach
« on: April 27, 2006, 10:43:06 AM »
Just in case you didnt see where the video tutorials were in the mach support site, here is the link.
http://www.machsupport.com/videos.htm
Re: Video Tutorials for Mach
« Reply #1 on: April 24, 2007, 11:02:24 AM »
ynneb,

I have been trying for weeks to get to the videos but continue to get an error finding the page.  I can only access the ModBus video with functional download and view buttons but all the others are a no go.  Do you have any ideas?  I have tried several computers on different networks and always the same result.

thanks
Keith Clark

Online Chaoticone

*
  • *
  •  5,571 5,571
  • Precision Chaos
    • View Profile
Re: Video Tutorials for Mach
« Reply #2 on: April 24, 2007, 11:05:39 AM »
Keith,
    Which videos are you trying to get? I will try to download them for you and send them to you. They are working on a video interface that should help with this.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Video Tutorials for Mach
« Reply #3 on: April 24, 2007, 12:19:49 PM »
Thanks, I would like to see inputs and outputs, scripting, and intro to turning for now.

Thanks
Keith

Online Chaoticone

*
  • *
  •  5,571 5,571
  • Precision Chaos
    • View Profile
Re: Video Tutorials for Mach
« Reply #4 on: April 24, 2007, 12:42:40 PM »
Sorry Keith, no luck. I will see if I can get them for you though. I could only view the scripting and turn intro. I couldn't download any of them and I could not view ins and outs. :(

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Video Tutorials for Mach
« Reply #5 on: April 24, 2007, 02:09:55 PM »
Brett,

That was my problem.  I don't think anyone believes that there is a problem.  It does not seem like a high-traffic issue but I don't know for sure. I have tired all hours of the night and day.

Thanks for the effort!

Keith
Re: Video Tutorials for Mach
« Reply #6 on: October 13, 2007, 01:07:51 AM »
I just went to see and download some videos and they are not working I am really intersted in tool change stuff but at present I am a complete noob so all the videos might be a good I dea for me.

Bearwen

Online Chaoticone

*
  • *
  •  5,571 5,571
  • Precision Chaos
    • View Profile
Re: Video Tutorials for Mach
« Reply #7 on: October 13, 2007, 01:11:16 AM »
Try it here, see where the cursor is pointing in the screen shot.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Video Tutorials for Mach
« Reply #9 on: October 26, 2008, 08:49:15 AM »
 ???
I downloaded the video's but the one I wanted to use (newfangled) ihas an asynchronous sound, so the screens are faster the the sound which is very disturbing.
Has anyone a solution or is it really the quality of the video itself?

Andre