I've double checked everything and the motors and drives are set correctly.2000 steps, 1.8 degree motors. I bought everything as a package from
Automation Direct, so I know everything should work together. The scale is set at 1 on the DRO's. When I manual input values, say as inputting 1 inch I'll get only about .200 so I'm about 1/5th what I should be at. My lead screws are 5 TPI. I can set my drives up to 10000 steps. I reset my drives for 1000 step and I still get a reading of 1/5 of what I should have.