Hello Guest it is November 29, 2020, 02:45:05 AM

Author Topic: MaxNC and backlash  (Read 3367 times)

0 Members and 1 Guest are viewing this topic.

MaxNC and backlash
« on: April 26, 2006, 06:59:50 PM »
I am trying to set up and old MaxNC10 board ( it is from the year 1999, not one of the 1018A/B boards mentioned in a help documant I read) with Mach3.
I haven't got backlash compensation to work yet, just delays/pauses in code excecution.

I have read some posts about Mach3 not compensating for backlash in wave mode.

Can someone confirm this?
Is there any mods to the board that can be done?
Thanks

Offline ART

*
  • *
  •  1,700 1,700
  • Tough as soggy paper.
    • View Profile
Re: MaxNC and backlash
« Reply #1 on: April 26, 2006, 08:49:45 PM »
Hi:

 Its true, in MaxNC modes, there is no software Backlash comp.

It cannot be added at this time..

  Only a switchover to new drivers can fix that up..

Sorry,
Art
Re: MaxNC and backlash
« Reply #2 on: April 26, 2006, 09:03:08 PM »
what do I look for in a driver that is compatible?

Offline ART

*
  • *
  •  1,700 1,700
  • Tough as soggy paper.
    • View Profile
Re: MaxNC and backlash
« Reply #3 on: April 26, 2006, 09:49:42 PM »
Hi:

  I meant motor drivers, not a program driver. It needs to be step/direction before it can backlash correct..


Art