Hello Guest it is April 16, 2024, 07:43:06 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: motor settings and xyz limits cnc9000  (Read 2986 times)

0 Members and 1 Guest are viewing this topic.

Offline cpcbman

*
  • 3 3
    • View Profile
motor settings and xyz limits cnc9000
« on: January 14, 2008, 08:37:59 AM »
anyone familiar with the CNC9000 from Circuit Specialist Inc, if so any suggestions on motor tuning?
Is there a way to set X,Y,Z limits using machine coordinates if I do not have limit switches installed?

Very new user
Logged

Offline Hood

*
  • 25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: motor settings and xyz limits cnc9000
« Reply #1 on: January 14, 2008, 02:13:33 PM »
If you do not have limits you can still set soft limits by jogging your table to an axis extreme and pressing the Ref button for that axis (you want Auto Zero checked ) Then when you set up your softlimits you set the min for axis zero and the max for the axis travel.
Hood
Logged

Offline Hood

*
  • 25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: motor settings and xyz limits cnc9000
« Reply #2 on: January 14, 2008, 02:14:47 PM »
BTW make sure you jog to that position and ref every time you Open Mach as this is the only way Mach knows where your table is.
Hood
Logged
Pages: 1   Go Up
« previous next »