Hello Guest it is July 12, 2020, 04:49:40 PM

Author Topic: Inch and mm  (Read 2020 times)

0 Members and 1 Guest are viewing this topic.

Inch and mm
« on: April 24, 2006, 02:51:57 PM »
Hi all,
can anyone tell me how I can use mach 3 for both Inch and mm.

Kind Regards

Bill S
Re: Inch and mm
« Reply #1 on: April 24, 2006, 05:22:20 PM »
Look at G20 and G21.. G20 is inch and G21 is mm
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com