Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Bill s on April 24, 2006, 02:51:57 PM

Title: Inch and mm
Post by: Bill s on April 24, 2006, 02:51:57 PM

Hi all,
can anyone tell me how I can use mach 3 for both Inch and mm.

Kind Regards

Bill S

Title: Re: Inch and mm
Post by: Brian Barker on April 24, 2006, 05:22:20 PM

Look at G20 and G21.. G20 is inch and G21 is mm