I have Mach 4 - hobby, C82 - dual-port multifunction board - torch height control - PlasmaSensOut
I had installed and purchased a hobby license.
Mach4Hobby_Installer-4.2.0.4612
ESS_Mach4_v278.1
The X axis, Y axis and Z axis worked correctly. When I connected and turned on the HC
the signals for the HC come to me and I see them on the screen as the indicator light lights up, but the Z axis does not respond to them. Even though I have the HC switched to manual control, the Z axis does not respond.
I tried everything I could think of but the HC did not work.
I uploaded a new plugin, I did not change anything, I just uploaded a new plugin there
ESS_Mach4_v320
The X axis, Y axis worked correctly but the Z axis does not move at all even when I turn off the HC. At least the Z axis worked with the 278 plugin.
When I put plugin 278 back in, my Z axis starts working again.
1. Can you tell me what changed that made my Z axis stop working after uploading the new plugin. And how do I fix it?
2. Why doesn't my HC work at all?