Hello Guest it is March 03, 2026, 12:54:24 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: UC300 turning on water cooler with the spindle  (Read 12741 times)

0 Members and 1 Guest are viewing this topic.

Offline niki21

*
  • 3 3
UC300 turning on water cooler with the spindle
« on: February 11, 2024, 02:42:32 AM »
I have a CNC machine with UC300 controller, 2.2K water cooled spindle.
How can I define in the software that the water pump will be activated automatically when the spindle is running?
(through a relay of course)
Logged

Offline birillo1959

*
  • 181 181
Re: UC300 turning on water cooler with the spindle
« Reply #1 on: February 11, 2024, 04:55:41 AM »
Good morning
I (in my small way) connected it directly to the HUANYANG VFD
It has a built-in relay which when active the spindle trips and the pump starts
Greetings
Logged

Offline niki21

*
  • 3 3
Re: UC300 turning on water cooler with the spindle
« Reply #2 on: February 11, 2024, 07:43:12 AM »
Quote from: birillo1959 on February 11, 2024, 04:55:41 AM
Good morning
I (in my small way) connected it directly to the HUANYANG VFD
It has a built-in relay which when active the spindle trips and the pump starts
Greetings

ok. tnx.
How many amperes can this relay carry ?
Did you use another relay that it activates ?
« Last Edit: February 11, 2024, 07:45:34 AM by niki21 »
Logged

Offline birillo1959

*
  • 181 181
Re: UC300 turning on water cooler with the spindle
« Reply #3 on: February 11, 2024, 09:18:44 AM »
yes, with the output from the VFD I control another relay for the pump
Greetings
Logged

Offline niki21

*
  • 3 3
Re: UC300 turning on water cooler with the spindle
« Reply #4 on: February 11, 2024, 12:28:04 PM »
Thank you.
Logged
Pages: 1   Go Up
« previous next »