Hello,
I was able to try out the saw last night, or should I say I put off the rest of the work I have to do to try it.
After a bit of trial & error, I was able to cut 11 parts (black acetal 2-1/4" diameter by .550" long) To within .01" of each other!
The biggest variable right now is that I need to loosen my stock clamp by hand right now to relieve enough pressure for the "feeder" to work. Once I came up with a system, the repeatability was great in my eyes. The "system" that worked for me was for feeding the clamp handle was @ 6:00 and for cutting the clamp was @ 3:00.
Some sytem Huh? Well I definitely have a lot of things to add but at least I know I am not off my rocker, at least with this idea!
I made a video but even zipped it is 5 meg so I can't post it. Any one interested let me know I'll send it. It is not an action film at 6"/min feedrate but it is making parts!
regards,
Cutmore