I found out what vfd I have. I opened up the machine and found the model number etc on the vfd. It is a MK100-1S2.2g-DK
I was able to find an owners manual for the setting on the keypad.
I followed the instructions to get the setting changed from control from Mach3 to control from the keypad. I can then test the spindle. None of the indicator lights come on in the keypad to show power on etc. Only the number appear. I can scroll through the settings but can not change any of them.
I tried the spindle calibrate tab and the graph shows up but but does not start.
Any thoughts on this? Should I start a new top and posts for this?
Thanks for the help. Very frustrating
Garnet